There are some basic and quick automotive air conditioning fixing tips that might enable you to get a few more days from the system prior to getting it in to be examined by a mechanic or automotive cooling technician. The following are basic, easy repair tips that can help you address the problem or at least have the ability to better explain the scenario to the mechanic.
The condenser is at the front of the vehicle, under the hood near the radiator. In older models of vehicles, there will be a noticeable fan, ensure the blades are turning when the automotive air conditioning dial or switch is in the “on” position. If the vehicle is a recent model, there will not be blades noticeable, however, you ought to have the ability to hear the electric motor of the fan engage. If the fan is not turning, the heat is not being eliminated from the Freon, which in turn is not permitting the evaporator core in the dash to cool down the air since the Freon is hot. Often, a blown fuse can be replaced or a wire needs to be reconnected to the fan to remedy the issue. The fuse diagram in the owners handbook will show which fuse controls the condenser fan motor.
If the engine of the vehicle is running too hot either because of an emissions system or exhaust problem, the system will not allow the Freon to cool substantially enough to cool the air in the passenger area of the vehicle. Many engines have their own cooling fan; ensure that it is running. In addition, ensure that there plenty of coolant in the cars reservoir to ensure correct engine temperature levels.
Only a skilled professional ought to work with the automotive air conditioning system as Freon is hazardous. If the pressure or levels of Freon drop in the vehicle, the cooling capability of the system is substantially reduced. Have the vehicle checked by a garage that has air conditioning repair work accreditation to check this problem. If you think there might be a small leak in the system, purchase a can of dye, readily available in the automobile air conditioning area of the auto parts shop, and add it to the system using the instructions on the can. You can then inspect for leakages in the hoses along the cooling system. Huge leaks will be obvious by the staining or discoloration along the hose or tubing http://www.jacksonfoster.com/ .